Licensed Electricians · Norwood, NC

Custom Lighting · Weddington, NC

Custom Lighting Installation
in Weddington, NC

Recessed lighting, under-cabinet systems, landscape lighting, and smart controls. Bobby Shaver designs and wires custom lighting for Weddington homes and businesses from the panel out.

Scope It Out Call (704) 575-9463

Lighting That Works for Your Space

Engineer-planned circuits, not just fixture swaps

Most electricians handle lighting the same way: swap the fixture, cap the wire, move on. That approach works for simple replacements. It falls short when you are transforming a living room with recessed lighting, adding under-cabinet task lights to a kitchen remodel, or wiring landscape systems that need to run reliably through a Carolina winter.

Bobby Shaver approaches custom lighting with the same precision he brought to Michelin automation systems for twelve and a half years. Before the first fixture goes in, he maps the circuit load, plans switch leg placement, and confirms the panel has capacity. The result is a lighting system that behaves exactly as designed and stays that way.

For Weddington homeowners building or remodeling, that level of planning matters. The homes here are large. The lighting expectations are high. Getting the circuit layout wrong means expensive rework later. Getting it right means lights that work the way you want, every time you flip the switch.

Licensed NC Electrical Contractor

12.5 Years Automation Engineering

Serving Union County Since 2022

Custom recessed lighting installation in Weddington, NC by 310 Construction LLC

Recessed lighting layout · Weddington, NC

What We Install

Custom lighting systems for every room and application

From a single bedroom conversion to a whole-home lighting design, 310 Construction handles the circuit work that makes lighting systems run right.

Recessed Lighting

IC-rated remodel and new-construction cans, LED retrofits, and wafer lights. Bobby maps trim placement before cutting and routes wiring through existing cavities wherever ceiling access is limited.

Under-Cabinet Lighting

Hardwired LED strip systems and puck lights for kitchen and bath remodels. Wiring is concealed inside cabinet runs so there are no exposed cords or outlet clutter on the counter.

Accent and Cove Lighting

LED cove systems, toe-kick lighting, and wall-wash fixtures for living rooms, dining rooms, and offices. These are dedicated circuits with proper dimmer compatibility, not plug-in strips.

Landscape and Exterior Lighting

Low-voltage pathway and garden systems, line-voltage driveway and soffit lighting, and security floodlights. All exterior wiring is weatherproof PVC conduit with code-compliant GFCI protection.

Smart Dimmer and Control Systems

Lutron Caseta, Leviton Decora Smart, and standard smart dimmers properly wired with neutral conductors where required. Bobby has automation engineering background and knows what these systems actually need.

Garage and Workshop Lighting

LED shop light arrays, surface-mount fixtures, and dedicated circuits for garages and detached workshops. Proper illumination for workbenches, vehicle bays, and storage areas with full code compliance.

How It Works

Four steps from first call to finished install

Walk-through and circuit plan

Bobby visits your Weddington home, walks the rooms you want lit, and reviews your panel capacity. He maps fixture placement, switch leg locations, and circuit routing before any work begins. No surprises once tools come out.

Permit pull and scheduling

For any work requiring a Union County electrical permit, 310 Construction handles the permit application and schedules around the inspection window. You get a legal, inspected install that satisfies your homeowner’s insurance.

Clean, precise installation

Wiring is run through walls and ceilings with minimal drywall disruption wherever possible. Fixtures are set to level, trim is sealed tight, and all connections are made in properly rated junction boxes. No wire nuts buried in finished ceilings.

Test, confirm, and walk-through

Every fixture, switch, and dimmer is tested before Bobby leaves. He walks through the completed system with you, explains any smart control programming, and answers any questions. Satisfaction before the invoice is closed.

Weddington, NC

Why Weddington homeowners choose 310 Construction for lighting

Weddington is one of the fastest-growing high-income communities in Union County. New construction and major remodels are happening across the township, and the lighting expectations that come with those projects require more than a standard residential electrician.

Bobby Shaver has wired lighting systems for Weddington homes ranging from single-room recessed lighting retrofits to whole-home remodel projects involving dozens of circuits. His automation engineering background means he approaches each project with a schematic mindset rather than improvising as work progresses.

That discipline shows up in the finished product. Dimmers that do not flicker. Exterior systems that do not trip GFCIs in the rain. Recessed lighting that is set at consistent depths so all the trims sit flush. These are details that matter in a home where the craftsmanship bar is high.

310 Construction is local to the greater Union County area and regularly works in Weddington, Waxhaw, Marvin, and the surrounding communities. Same-day scheduling is often available for straightforward lighting work. Call (704) 575-9463 to talk through your project or visit the contact page to schedule a walk-through.

Scope It Out View Gallery

Serving Weddington and all of Union County, NC

Also in Weddington

Other electrical services we provide in Weddington, NC

EV Charger Installation

Level 2 and 240V EV charger installation for Tesla, ChargePoint, JuiceBox, and every major brand. Dedicated circuits, permit handling, and inspection coordination.

Panel Upgrades

200A and 400A panel upgrades for Weddington homes adding EV chargers, hot tubs, additions, or home offices with heavy electrical loads.

Backup Generators

Generac, Kohler, and Briggs standby generator installation with automatic transfer switches. Keep your Weddington home running through any outage.

View all services in Weddington, NC or see the full services list.

Common Questions

Custom lighting questions from Weddington homeowners

What types of custom lighting does 310 Construction install in Weddington?

We install recessed can lighting, LED retrofit trims, under-cabinet lighting, cove and accent lighting, exterior landscape and pathway lighting, garage lighting, smart dimmer systems, and dedicated circuits for chandeliers or pendant fixtures. Bobby plans the circuit layout before the first hole is cut.

Do I need a permit for custom lighting installation in Weddington, NC?

Adding new circuits or subpanels for a lighting system requires an electrical permit in Union County. Bobby handles the permit pull and coordinates the inspection. Replacing fixtures on existing circuits typically does not require a permit, but we confirm that during the scope review.

Can you add recessed lighting without cutting into the ceiling from above?

Yes. We use remodel-style IC-rated cans that install through a 4-inch hole from below, requiring no attic access. We fish the wiring through existing wall and ceiling cavities where possible. In homes with spray foam or inaccessible attics, we plan alternate routing before starting.

How much does custom lighting installation cost in Weddington?

A standard recessed lighting installation in Weddington runs approximately $125 to $250 per fixture depending on ceiling access and circuit routing. Landscape lighting systems, smart-dimmer integrations, and new circuit runs are priced by scope. Call for a walk-through and we will scope it out before any money changes hands.

Can you integrate custom lighting with smart home systems?

Yes. Bobby has Michelin automation engineering background and wires lighting for Lutron, Leviton, Legrand, and standard smart dimmer platforms. We install the wiring and switch legs that smart controls require, and can tie lighting into broader home automation systems.

Do you handle landscape and exterior lighting as well as interior?

Yes. Exterior lighting is a significant part of our work in Weddington. We install low-voltage landscape systems, line-voltage path and driveway lighting, soffit and facade lighting, and security lighting. All exterior runs are weatherproof and code-compliant.

Ready to light your Weddington home right?

Call Bobby Shaver at 310 Construction for a walk-through and scope. Licensed, insured, and engineer-precise on every install in Union County.